WHEN MOISTURE IS TORTURE
Simple & Cost effective Drying using Dehumidifiers

The problems related to product drying are typically:
Quality of Drying & Speed of Drying. Normally products are dried with hot air. However most products which require drying are temperature sensitive.

Moisture is present in the products as: Drying operations involve the removal of all moisture to the required level. Surface moisture (and it is often assumed that it is only type of moisture present) is conventionally removed by raising the product temperature by using hot air to vaporize the moisture. However this can result in product spoilage as many products like cocoa, gelatin, coffee etc are temperature sensitive and need to be dried at low temperature.

Proper removal of the hygroscopic moisture depends on the difference between the relative humidity of the air surrounding the product and of the product’s equilibrium condition. If the RH of surrounding air is lower, then the product will give up its hygroscopic moisture to the drier air to be in equilibrium with its surrounding velocity of the air over the product have little or no bearing on the drying speed?

Product Drying application are typically :
As every material has different physical characteristics, which determine how it holds or gives up moisture, and published data on their drying is generally not available, selecting appropriate air-drying equipment must be done experimentally.

Usually the sudden change in drying rate (at the critical point) donates where the initial drying via removal of free moisture ends, and hygroscopic drying takes place over. In other words, the product has lost its free moisture but is still hygroscopic ally saturated. However the net effective drying surface and hygroscopic properties cannot be determined in any other way.

Advantages of Using Dehumidification over other methods
Dehumidification is the most cost effective and easy method to ensure drying without spoilage as the drying is based on the difference in vapor pressures of water in the product and the surrounding air. By physically removing the moisture from air, through the condensation the evaporative potential of the air is maximized.
Environment Drying
Some applications demand reduction of Humidity form the atmosphere of the Room, Cabin, Hall & Buildings. Certain critical electronic components, Server Rooms, Laptop, Digital Photocopiers and machinery behave adversely due to high humidity. During summer the humidity reduces upto 65% with the help of air conditioning but during the monsoon and during the winters the solution can be achieved only by Dehumidification.